Optionalx: numberOptionaly: numberOptionalchildren: SpineGameObject[]The active state of this Game Object.
A Game Object with an active state of true is processed by the Scenes UpdateList, if added to it.
An active object is one which is having its logic and internal systems updated.
The alpha value of the Game Object.
This is a global value, impacting the entire Game Object, not just a region of it.
The angle of this Game Object as expressed in degrees.
Phaser uses a right-hand clockwise rotation system, where 0 is right, 90 is down, 180/-180 is left and -90 is up.
If you prefer to work in radians, see the rotation property instead.
Sets the Blend Mode being used by this Game Object.
This can be a const, such as Phaser.BlendModes.SCREEN, or an integer, such as 4 (for Overlay)
Under WebGL only the following Blend Modes are available:
Canvas has more available depending on browser support.
You can also create your own custom Blend Modes in WebGL.
Blend modes have different effects under Canvas and WebGL, and from browser to browser, depending on support. Blend Modes also cause a WebGL batch flush should it encounter a new blend mode. For these reasons try to be careful about the construction of your Scene and the frequency of which blend modes are used.
If this Game Object is enabled for Arcade or Matter Physics then this property will contain a reference to a Physics Body.
A bitmask that controls if this Game Object is drawn by a Camera or not.
Not usually set directly, instead call Camera.ignore, however you can
set this property directly using the Camera.id property:
A Data Manager.
It allows you to store, query and get key/value paired information specific to this Game Object.
null by default. Automatically created if you use getData or setData or setDataEnabled.
The depth of this Game Object within the Scene. Ensure this value is only ever set to a number data-type.
The depth is also known as the 'z-index' in some environments, and allows you to change the rendering order of Game Objects, without actually moving their position in the display list.
The default depth is zero. A Game Object with a higher depth value will always render in front of one with a lower value.
Setting the depth will queue a depth sort event within the Scene.
The displayed height of this Game Object.
This value takes into account the scale factor.
Setting this value will adjust the Game Object's scale property.
Holds a reference to the Display List that contains this Game Object.
This is set automatically when this Game Object is added to a Scene or Layer.
You should treat this property as being read-only.
ReadonlydisplayInternal value to allow Containers to be used for input and physics. Do not change this value. It has no effect other than to break things.
ReadonlydisplayInternal value to allow Containers to be used for input and physics. Do not change this value. It has no effect other than to break things.
The displayed width of this Game Object.
This value takes into account the scale factor.
Setting this value will adjust the Game Object's scale property.
Does this Container exclusively manage its children?
The default is true which means a child added to this Container cannot
belong in another Container, which includes the Scene display list.
If you disable this then this Container will no longer exclusively manage its children. This allows you to create all kinds of interesting graphical effects, such as replicating Game Objects without reparenting them all over the Scene. However, doing so will prevent children from receiving any kind of input event or have their physics bodies work by default, as they're no longer a single entity on the display list, but are being replicated where-ever this Container is.
The Camera used for filters. You can use this to alter the perspective of filters. It is not necessary to use this camera for ordinary rendering.
This is only available if you use the enableFilters method.
ReadonlyfiltersGet the filters lists.
This is an object with internal and external properties.
Each list is a {@see Phaser.GameObjects.Components.FilterList} object.
This is only available if you use the enableFilters method.
Whether filterCamera should update every frame
to focus on the Game Object.
Disable this if you want to manually control the camera.
Whether the filters should focus on the context, rather than attempt to focus on the Game Object. This is enabled automatically when enabling filters on objects which don't have well-defined bounds.
This effectively sets the internal filters to render the same way as the external filters.
This is only used if filtersAutoFocus is enabled.
The "context" is the framebuffer to which the Game Object is rendered. This is usually the main framebuffer, but might be another framebuffer. It can even be several different framebuffers if the Game Object is rendered multiple times.
Whether the Filters component should always draw to a framebuffer, even if there are no active filters.
ReadonlyfirstReturns the first Game Object within the Container, or null if it is empty.
You can move the cursor by calling Container.next and Container.previous.
ReadonlyhasA property indicating that a Game Object has this component.
The native (un-scaled) height of this Game Object.
Changing this value will not change the size that the Game Object is rendered in-game.
For that you need to either set the scale of the Game Object (setScale) or use
the displayHeight property.
This Game Object will ignore all calls made to its destroy method if this flag is set to true.
This includes calls that may come from a Group, Container or the Scene itself.
While it allows you to persist a Game Object across Scenes, please understand you are entirely
responsible for managing references to and from this Game Object.
If this Game Object is enabled for input then this property will contain an InteractiveObject instance.
Not usually set directly. Instead call GameObject.setInteractive().
ReadonlylastReturns the last Game Object within the Container, or null if it is empty.
You can move the cursor by calling Container.next and Container.previous.
ReadonlylengthThe number of Game Objects inside this Container.
An array holding the children of this Container.
Internal Transform Matrix used for local space conversion.
The Mask this Game Object is using during render.
The maximum size of the base filter texture. Filters may use a larger texture after the base texture is rendered. The maximum texture size is 4096 in WebGL. You may set this lower to save memory or prevent resizing.
Containers can have an optional maximum size. If set to anything above 0 it will constrict the addition of new Game Objects into the Container, capping off the maximum limit the Container can grow in size to.
The name of this Game Object. Empty by default and never populated by Phaser, this is left for developers to use.
ReadonlynextReturns the next Game Object within the Container, or null if it is empty.
You can move the cursor by calling Container.next and Container.previous.
ReadonlyoriginInternal value to allow Containers to be used for input and physics. Do not change this value. It has no effect other than to break things.
ReadonlyoriginInternal value to allow Containers to be used for input and physics. Do not change this value. It has no effect other than to break things.
The parent Container of this Game Object, if it has one.
The cursor position.
ReadonlypreviousReturns the previous Game Object within the Container, or null if it is empty.
You can move the cursor by calling Container.next and Container.previous.
Whether any filters should be rendered on this Game Object.
This is true by default, even if there are no filters yet.
Disable this to skip filter rendering.
Use willRenderFilters() to see if there are any active filters.
The flags that are compared against RENDER_MASK to determine if this Game Object will render or not.
The bits are 0001 | 0010 | 0100 | 1000 set by the components Visible, Alpha, Transform and Texture respectively.
If those components are not used by your custom class then you can use this bitmask as you wish.
The angle of this Game Object in radians.
Phaser uses a right-hand clockwise rotation system, where 0 is right, PI/2 is down, +-PI is left and -PI/2 is up.
If you prefer to work in degrees, see the angle property instead.
This is a special setter that allows you to set both the horizontal and vertical scale of this Game Object
to the same value, at the same time. When reading this value the result returned is (scaleX + scaleY) / 2.
Use of this property implies you wish the horizontal and vertical scales to be equal to each other. If this
isn't the case, use the scaleX or scaleY properties instead.
The horizontal scale of this Game Object.
The vertical scale of this Game Object.
A reference to the Scene to which this Game Object belongs.
Game Objects can only belong to one Scene.
You should consider this property as being read-only. You cannot move a Game Object to another Scene by simply changing it.
The horizontal scroll factor of this Container.
The scroll factor controls the influence of the movement of a Camera upon this Container.
When a camera scrolls it will change the location at which this Container is rendered on-screen. It does not change the Containers actual position values.
For a Container, setting this value will only update the Container itself, not its children.
If you wish to change the scrollFactor of the children as well, use the setScrollFactor method.
A value of 1 means it will move exactly in sync with a camera. A value of 0 means it will not move at all, even if the camera moves. Other values control the degree to which the camera movement is mapped to this Container.
Please be aware that scroll factor values other than 1 are not taken in to consideration when calculating physics collisions. Bodies always collide based on their world position, but changing the scroll factor is a visual adjustment to where the textures are rendered, which can offset them from physics bodies if not accounted for in your code.
The vertical scroll factor of this Container.
The scroll factor controls the influence of the movement of a Camera upon this Container.
When a camera scrolls it will change the location at which this Container is rendered on-screen. It does not change the Containers actual position values.
For a Container, setting this value will only update the Container itself, not its children.
If you wish to change the scrollFactor of the children as well, use the setScrollFactor method.
A value of 1 means it will move exactly in sync with a camera. A value of 0 means it will not move at all, even if the camera moves. Other values control the degree to which the camera movement is mapped to this Container.
Please be aware that scroll factor values other than 1 are not taken in to consideration when calculating physics collisions. Bodies always collide based on their world position, but changing the scroll factor is a visual adjustment to where the textures are rendered, which can offset them from physics bodies if not accounted for in your code.
The current state of this Game Object.
Phaser itself will never modify this value, although plugins may do so.
Use this property to track the state of a Game Object during its lifetime. For example, it could change from a state of 'moving', to 'attacking', to 'dead'. The state value should be an integer (ideally mapped to a constant in your game code), or a string. These are recommended to keep it light and simple, with fast comparisons. If you need to store complex data about your Game Object, look at using the Data Component instead.
The Tab Index of the Game Object. Reserved for future use by plugins and the Input Manager.
A textual representation of this Game Object, i.e. sprite.
Used internally by Phaser but is available for your own custom classes to populate.
The current vertex rounding mode of this Game Object. This is used by the WebGL Renderer to determine how to round the vertex positions. It can have several values:
off - No rounding is applied.safe - Rounding is applied if the object is 'safe'.safeAuto - Rounding is applied if the object is 'safe' and the camera has roundPixels enabled.full - Rounding is always applied.fullAuto - Rounding is always applied if the camera has roundPixels enabled.A 'safe' object is one that is not rotated or scaled by any transform matrix while rendering. The effective transform is a simple translation. In such cases, rounding will affect all vertices the same way.
Using full rounding can cause vertices to wobble, because they might not be aligned to the pixel grid. Full rounding gives a janky look like PS1 games.
You can use other values if you want to create your own custom rounding modes.
The visible state of the Game Object.
An invisible Game Object will skip rendering, but will still process update logic.
The w position of this Game Object.
The native (un-scaled) width of this Game Object.
Changing this value will not change the size that the Game Object is rendered in-game.
For that you need to either set the scale of the Game Object (setScale) or use
the displayWidth property.
The x position of this Game Object.
The y position of this Game Object.
The z position of this Game Object.
Note: The z position does not control the rendering order of 2D Game Objects. Use Phaser.GameObjects.Components.Depth#depth instead.
Static ReadonlyRENDER_The bitmask that GameObject.renderFlags is compared against to determine if the Game Object will render or not.
Adds the given Game Object, or array of Game Objects, to this Container.
Each Game Object must be unique within the Container.
The Game Object, or array of Game Objects, to add to the Container.
Adds the given Game Object, or array of Game Objects, to this Container at the specified position.
Existing Game Objects in the Container are shifted up.
Each Game Object must be unique within the Container.
The Game Object, or array of Game Objects, to add to the Container.
Optionalindex: numberThe position to insert the Game Object/s at. Default 0.
This callback is invoked when this Game Object is added to a Scene.
Can be overriden by custom Game Objects, but be aware of some Game Objects that will use this, such as Sprites, to add themselves into the Update List.
You can also listen for the ADDED_TO_SCENE event from this Game Object.
Add a listener for a given event.
The event name.
The listener function.
Optionalcontext: anyThe context to invoke the listener with. Default this.
Add a render step.
The first render step in _renderSteps is run first.
It should call the next render step in the list.
This allows render steps to control the rendering flow.
The render step function to add.
Optionalindex: numberThe index in the render list to add the step to. Omit to add to the end.
Adds this Game Object to the given Display List.
If no Display List is specified, it will default to the Display List owned by the Scene to which this Game Object belongs.
A Game Object can only exist on one Display List at any given time, but may move freely between them.
If this Game Object is already on another Display List when this method is called, it will first be removed from it, before being added to the new list.
You can query which list it is on by looking at the Phaser.GameObjects.GameObject#displayList property.
If a Game Object isn't on any display list, it will not be rendered. If you just wish to temporarly
disable it from rendering, consider using the setVisible method, instead.
OptionaldisplayList: DisplayList | LayerThe Display List to add to. Defaults to the Scene Display List.
Adds this Game Object to the Update List belonging to the Scene.
When a Game Object is added to the Update List it will have its preUpdate method called
every game frame. This method is passed two parameters: delta and time.
If you wish to run your own logic within preUpdate then you should always call
super.preUpdate(time, delta) within it, or it may fail to process required operations,
such as Sprite animations.
Brings the given Game Object to the top of this Container. This will cause it to render on-top of any other objects in the Container.
The Game Object to bring to the top of the Container.
Clears all alpha values associated with this Game Object.
Immediately sets the alpha levels back to 1 (fully opaque).
Clears the mask that this Game Object was using.
This only works in the Canvas Renderer. In WebGL, use a Mask filter instead (see Phaser.GameObjects.Components.FilterList#addMask).
OptionaldestroyMask: booleanDestroy the mask before clearing it? Default false.
Copies an object's coordinates to this Game Object's position.
An object with numeric 'x', 'y', 'z', or 'w' properties. Undefined values are not copied.
Returns the total number of Game Objects in this Container that have a property matching the given value.
For example: count('visible', true) would count all the elements that have their visible property set.
You can optionally limit the operation to the startIndex - endIndex range.
The property to check.
The value to check.
OptionalstartIndex: numberAn optional start index to search from. Default 0.
OptionalendIndex: numberAn optional end index to search up to (but not included) Default Container.length.
Optionalrenderable: GameObjectCreates and returns a Geometry Mask. This mask can be used by any Game Object, including this one.
To create the mask you need to pass in a reference to a Graphics Game Object.
If you do not provide a graphics object, and this Game Object is an instance of a Graphics object, then it will use itself to create the mask.
This means you can call this method to create a Geometry Mask from any Graphics Game Object.
This only works in the Canvas Renderer. In WebGL, use a Mask filter instead (see Phaser.GameObjects.Components.FilterList#addMask).
Optionalgraphics: GameObjects.GraphicsA Graphics Game Object, or any kind of Shape Game Object. The geometry within it will be used as the mask.
Destroys this Game Object removing it from the Display List and Update List and severing all ties to parent resources.
Also removes itself from the Input Manager and Physics Manager if previously enabled.
Use this to remove a Game Object from your game if you don't ever plan to use it again. As long as no reference to it exists within your own code it should become free for garbage collection by the browser.
If you just want to temporarily disable an object then look at using the Game Object Pool instead of destroying it, as destroyed objects cannot be resurrected.
OptionalfromScene: booleanTrue if this Game Object is being destroyed by the Scene, false if not. Default false.
If this Game Object has previously been enabled for input, this will disable it.
An object that is disabled for input stops processing or being considered for
input events, but can be turned back on again at any time by simply calling
setInteractive() with no arguments provided.
If want to completely remove interaction from this Game Object then use removeInteractive instead.
OptionalresetCursor: booleanShould the currently active Input cursor, if any, be reset to the default cursor? Default false.
Passes all Game Objects in this Container to the given callback.
A copy of the Container is made before passing each entry to your callback. This protects against the callback itself modifying the Container.
If you know for sure that the callback will not change the size of this Container
then you can use the more performant Container.iterate method instead.
The function to call.
Optionalcontext: objectValue to use as this when executing callback.
Additional arguments that will be passed to the callback, after the child.
Calls each of the listeners registered for a given event.
The event name.
Additional arguments that will be passed to the event handler.
Enable this Game Object to have filters.
You need to call this method if you want to use the filterCamera
and filters properties. It sets up the necessary data structures.
You may disable filter rendering with the renderFilters property.
This is a WebGL only feature. It will return early if not available.
Return an array listing the events for which the emitter has registered listeners.
Returns true if the given Game Object is a direct child of this Container.
This check does not scan nested Containers.
The Game Object to check for within this Container.
Focus the filter camera.
This sets the size and position of the filter camera to match the GameObject.
This is called automatically on render if filtersAutoFocus is enabled.
This will focus on the GameObject's raw dimensions if available. If the GameObject has no dimensions, this will focus on the context: the camera belonging to the DrawingContext used to render the GameObject. Context focus occurs during rendering, as the context is not known until then.
Manually override the focus of the filter camera.
This allows you to set the size and position of the filter camera manually.
It deactivates filtersAutoFocus when called.
The camera will set scroll to place the game object at the
given position within a rectangle of the given width and height.
For example, calling focusFiltersOverride(400, 200, 800, 600)
will focus the camera to place the object's center
100 pixels above the center of the camera (which is at 400x300).
Optionalx: numberThe x-coordinate of the focus point, relative to the filter size. Default is the center.
Optionaly: numberThe y-coordinate of the focus point, relative to the filter size. Default is the center.
Optionalwidth: numberThe width of the focus area. Default is the filter width.
Optionalheight: numberThe height of the focus area. Default is the filter height.
Returns all Game Objects in this Container.
You can optionally specify a matching criteria using the property and value arguments.
For example: getAll('body') would return only Game Objects that have a body property.
You can also specify a value to compare the property to:
getAll('visible', true) would return only Game Objects that have their visible property set to true.
Optionally you can specify a start and end index. For example if this Container had 100 Game Objects,
and you set startIndex to 0 and endIndex to 50, it would return matches from only
the first 50 Game Objects.
Optionalproperty: stringThe property to test on each Game Object in the Container.
Optionalvalue: anyIf property is set then the property must strictly equal this value to be included in the results.
OptionalstartIndex: numberAn optional start index to search from. Default 0.
OptionalendIndex: numberAn optional end index to search up to (but not included) Default Container.length.
Returns the Game Object at the given position in this Container.
The position to get the Game Object from.
Gets the bounds of this Container. It works by iterating all children of the Container, getting their respective bounds, and then working out a min-max rectangle from that. It does not factor in if the children render or not, all are included.
Some children are unable to return their bounds, such as Graphics objects, in which case they are skipped.
Depending on the quantity of children in this Container it could be a really expensive call, so cache it and only poll it as needed.
The values are stored and returned in a Rectangle object.
Returns the world transform matrix as used for Bounds checks.
The returned matrix is temporal and shouldn't be stored.
Searches for the first instance of a child with its name property matching the given argument.
Should more than one child have the same name only the first is returned.
The name to search for.
Retrieves the value for the given key in this Game Objects Data Manager, or undefined if it doesn't exist.
You can also access values via the values object. For example, if you had a key called gold you can do either:
sprite.getData('gold');
Or access the value directly:
sprite.data.values.gold;
You can also pass in an array of keys, in which case an array of values will be returned:
sprite.getData([ 'gold', 'armor', 'health' ]);
This approach is useful for destructuring arrays in ES6.
The key of the value to retrieve, or an array of keys.
Returns a reference to the underlying display list array that contains this Game Object, which will be either the Scene's Display List or the internal list belonging to its parent Container, if it has one.
If this Game Object is not on a display list or in a container, it will return null.
You should be very careful with this method, and understand that it returns a direct reference to the internal array used by the Display List. Mutating this array directly can cause all kinds of subtle and difficult to debug issues in your game.
Gets the first Game Object in this Container.
You can also specify a property and value to search for, in which case it will return the first Game Object in this Container with a matching property and / or value.
For example: getFirst('visible', true) would return the first Game Object that had its visible property set.
You can limit the search to the startIndex - endIndex range.
The property to test on each Game Object in the Container.
The value to test the property against. Must pass a strict (===) comparison check.
OptionalstartIndex: numberAn optional start index to search from. Default 0.
OptionalendIndex: numberAn optional end index to search up to (but not included) Default Container.length.
Returns the index of the given Game Object in this Container.
The Game Object to search for in this Container.
Returns an array containing the display list index of either this Game Object, or if it has one, its parent Container. It then iterates up through all of the parent containers until it hits the root of the display list (which is index 0 in the returned array).
Used internally by the InputPlugin but also useful if you wish to find out the display depth of this Game Object and all of its ancestors.
Takes the given x and y coordinates and converts them into local space for this
Game Object, taking into account parent and local transforms, and the Display Origin.
The returned Vector2 contains the translated point in its properties.
A Camera needs to be provided in order to handle modified scroll factors. If no
camera is specified, it will use the main camera from the Scene to which this
Game Object belongs.
Gets the local transform matrix for this Game Object.
OptionaltempMatrix: TransformMatrixThe matrix to populate with the values from this Game Object.
Gets the sum total rotation of all of this Game Objects parent Containers.
The returned value is in radians and will be zero if this Game Object has no parent container.
Returns a random Game Object from this Container.
OptionalstartIndex: numberAn optional start index. Default 0.
Optionallength: numberAn optional length, the total number of elements (from the startIndex) to choose from.
Gets the world position of this Game Object, factoring in any parent Containers.
Optionalpoint: Math.Vector2A Vector2, or point-like object, to store the result in.
OptionaltempMatrix: TransformMatrixA temporary matrix to hold the Game Object's values.
OptionalparentMatrix: TransformMatrixA temporary matrix to hold parent values.
Gets the world transform matrix for this Game Object, factoring in any parent Containers.
OptionaltempMatrix: TransformMatrixThe matrix to populate with the values from this Game Object.
OptionalparentMatrix: TransformMatrixA temporary matrix to hold parent values during the calculations.
Increase a value for the given key within this Game Objects Data Manager. If the key doesn't already exist in the Data Manager then it is increased from 0.
If the Game Object has not been enabled for data (via setDataEnabled) then it will be enabled
before setting the value.
If the key doesn't already exist in the Data Manager then it is created.
When the value is first set, a setdata event is emitted from this Game Object.
The key to change the value for.
Optionalamount: numberThe amount to increase the given key by. Pass a negative value to decrease the key. Default 1.
Passes all Game Objects in this Container to the given callback.
Only use this method when you absolutely know that the Container will not be modified during the iteration, i.e. by removing or adding to its contents.
The function to call.
Optionalcontext: objectValue to use as this when executing callback.
Additional arguments that will be passed to the callback, after the child.
Return the number of listeners listening to a given event.
The event name.
Return the listeners registered for a given event.
The event name.
Moves a Game Object above another one within this Container. If the Game Object is already above the other, it isn't moved.
These 2 Game Objects must already be children of this Container.
Moves a Game Object below another one within this Container. If the Game Object is already below the other, it isn't moved.
These 2 Game Objects must already be children of this Container.
Moves the given Game Object down one place in this Container, unless it's already at the bottom.
The Game Object to be moved in the Container.
Moves a Game Object to a new position within this Container.
The Game Object must already be a child of this Container.
The Game Object is removed from its old position and inserted into the new one. Therefore the Container size does not change. Other children will change position accordingly.
The Game Object to move.
The new position of the Game Object in this Container.
Moves the given Game Object up one place in this Container, unless it's already at the top.
The Game Object to be moved in the Container.
Remove the listeners of a given event.
The event name.
Optionalfn: FunctionOnly remove the listeners that match this function.
Optionalcontext: anyOnly remove the listeners that have this context.
Optionalonce: booleanOnly remove one-time listeners.
Add a listener for a given event.
The event name.
The listener function.
Optionalcontext: anyThe context to invoke the listener with. Default this.
Add a one-time listener for a given event.
The event name.
The listener function.
Optionalcontext: anyThe context to invoke the listener with. Default this.
ProtectedonInternal handler, called when a child is destroyed.
Takes a Point-like object, such as a Vector2, or object with public x and y properties, and transforms it into the space of this Container, then returns it in the output object.
The Source Point to be transformed.
Optionaloutput: anyA destination object to store the transformed point in. If none given a Vector2 will be created and returned.
ProtectedpreInternal destroy handler, called as part of the destroy process.
Removes the given Game Object, or array of Game Objects, from this Container.
The Game Objects must already be children of this Container.
You can also optionally call destroy on each Game Object that is removed from the Container.
The Game Object, or array of Game Objects, to be removed from the Container.
OptionaldestroyChild: booleanOptionally call destroy on each child successfully removed from this Container. Default false.
Removes all Game Objects from this Container.
You can also optionally call destroy on each Game Object that is removed from the Container.
OptionaldestroyChild: booleanOptionally call destroy on each Game Object successfully removed from this Container. Default false.
Remove all listeners, or those of the specified event.
Optionalevent: string | symbolThe event name.
Removes the Game Object at the given position in this Container.
You can also optionally call destroy on the Game Object, if one is found.
The index of the Game Object to be removed.
OptionaldestroyChild: booleanOptionally call destroy on the Game Object if successfully removed from this Container. Default false.
Removes the Game Objects between the given positions in this Container.
You can also optionally call destroy on each Game Object that is removed from the Container.
OptionalstartIndex: numberAn optional start index to search from. Default 0.
OptionalendIndex: numberAn optional end index to search up to (but not included) Default Container.length.
OptionaldestroyChild: booleanOptionally call destroy on each Game Object successfully removed from this Container. Default false.
This callback is invoked when this Game Object is removed from a Scene.
Can be overriden by custom Game Objects, but be aware of some Game Objects that will use this, such as Sprites, to removed themselves from the Update List.
You can also listen for the REMOVED_FROM_SCENE event from this Game Object.
Removes this Game Object from the Display List it is currently on.
A Game Object can only exist on one Display List at any given time, but may move freely removed and added back at a later stage.
You can query which list it is on by looking at the Phaser.GameObjects.GameObject#displayList property.
If a Game Object isn't on any Display List, it will not be rendered. If you just wish to temporarly
disable it from rendering, consider using the setVisible method, instead.
Removes this Game Object from the Scene's Update List.
When a Game Object is on the Update List, it will have its preUpdate method called
every game frame. Calling this method will remove it from the list, preventing this.
Removing a Game Object from the Update List will stop most internal functions working. For example, removing a Sprite from the Update List will prevent it from being able to run animations.
If this Game Object has previously been enabled for input, this will queue it for removal, causing it to no longer be interactive. The removal happens on the next game step, it is not immediate.
The Interactive Object that was assigned to this Game Object will be destroyed, removed from the Input Manager and cleared from this Game Object.
If you wish to re-enable this Game Object at a later date you will need to
re-create its InteractiveObject by calling setInteractive again.
If you wish to only temporarily stop an object from receiving input then use
disableInteractive instead, as that toggles the interactive state, where-as
this erases it completely.
If you wish to resize a hit area, don't remove and then set it as being
interactive. Instead, access the hitarea object directly and resize the shape
being used. I.e.: sprite.input.hitArea.setSize(width, height) (assuming the
shape is a Rectangle, which it is by default.)
OptionalresetCursor: booleanShould the currently active Input cursor, if any, be reset to the default cursor? Default false.
Remove the listeners of a given event.
The event name.
Optionalfn: FunctionOnly remove the listeners that match this function.
Optionalcontext: anyOnly remove the listeners that have this context.
Optionalonce: booleanOnly remove one-time listeners.
Render this object using filters.
This function's scope is not guaranteed, so it doesn't refer to this.
The WebGL Renderer instance to render with.
The Game Object being rendered.
The current drawing context.
OptionalparentMatrix: TransformMatrixThe parent matrix of the Game Object, if it has one.
OptionalrenderStep: numberThe index of this function in the Game Object's list of render processes. Used to support multiple rendering functions. Default 0.
Run a step in the render process. This is called automatically by the Render module.
In most cases, it just runs the renderWebGL function.
When _renderSteps has more than one entry,
such as when Filters are enabled for this object,
it allows those processes to defer renderWebGL
and otherwise manage the flow of rendering.
The WebGL Renderer instance to render with.
The Game Object being rendered.
The current drawing context.
OptionalparentMatrix: TransformMatrixThe parent matrix of the Game Object, if it has one.
OptionalrenderStep: numberWhich step of the rendering process should be run? Default 0.
OptionaldisplayList: GameObject[]The display list which is currently being rendered. If not provided, it will be created with the Game Object.
OptionaldisplayListIndex: numberThe index of the Game Object within the display list. Default 0.
Replaces a Game Object in this Container with the new Game Object. The new Game Object cannot already be a child of this Container.
The Game Object in this Container that will be replaced.
The Game Object to be added to this Container.
OptionaldestroyChild: booleanOptionally call destroy on the Game Object if successfully removed from this Container. Default false.
Reverses the order of all Game Objects in this Container.
Sends the given Game Object to the bottom of this Container. This will cause it to render below any other objects in the Container.
The Game Object to send to the bottom of the Container.
Move this Game Object so that it appears above the given Game Object.
This means it will render immediately after the other object in the display list.
Both objects must belong to the same display list, or parent container.
This method does not change this Game Objects depth value, it simply alters its list position.
The Game Object that this Game Object will be moved to be above.
Sets the active property of this Game Object and returns this Game Object for further chaining.
A Game Object with its active property set to true will be updated by the Scenes UpdateList.
True if this Game Object should be set as active, false if not.
Sets the property to the given value on all Game Objects in this Container.
Optionally you can specify a start and end index. For example if this Container had 100 Game Objects,
and you set startIndex to 0 and endIndex to 50, it would return matches from only
the first 50 Game Objects.
The property that must exist on the Game Object.
The value to get the property to.
OptionalstartIndex: numberAn optional start index to search from. Default 0.
OptionalendIndex: numberAn optional end index to search up to (but not included) Default Container.length.
Set the Alpha level of this Game Object. The alpha controls the opacity of the Game Object as it renders. Alpha values are provided as a float between 0, fully transparent, and 1, fully opaque.
Optionalvalue: numberThe alpha value applied across the whole Game Object. Default 1.
Sets the angle of this Game Object.
Optionaldegrees: numberThe rotation of this Game Object, in degrees. Default 0.
Move this Game Object so that it appears below the given Game Object.
This means it will render immediately under the other object in the display list.
Both objects must belong to the same display list, or parent container.
This method does not change this Game Objects depth value, it simply alters its list position.
The Game Object that this Game Object will be moved to be below.
Sets the Blend Mode being used by this Game Object.
This can be a const, such as Phaser.BlendModes.SCREEN, or an integer, such as 4 (for Overlay)
Under WebGL only the following Blend Modes are available:
Canvas has more available depending on browser support.
You can also create your own custom Blend Modes in WebGL.
Blend modes have different effects under Canvas and WebGL, and from browser to browser, depending on support. Blend Modes also cause a WebGL batch flush should it encounter a new blend mode. For these reasons try to be careful about the construction of your Scene and the frequency in which blend modes are used.
The BlendMode value. Either a string, a CONST or a number.
Allows you to store a key value pair within this Game Objects Data Manager.
If the Game Object has not been enabled for data (via setDataEnabled) then it will be enabled
before setting the value.
If the key doesn't already exist in the Data Manager then it is created.
sprite.setData('name', 'Red Gem Stone');
You can also pass in an object of key value pairs as the first argument:
sprite.setData({ name: 'Red Gem Stone', level: 2, owner: 'Link', gold: 50 });
To get a value back again you can call getData:
sprite.getData('gold');
Or you can access the value directly via the values property, where it works like any other variable:
sprite.data.values.gold += 50;
When the value is first set, a setdata event is emitted from this Game Object.
If the key already exists, a changedata event is emitted instead, along an event named after the key.
For example, if you updated an existing key called PlayerLives then it would emit the event changedata-PlayerLives.
These events will be emitted regardless if you use this method to set the value, or the direct values setter.
Please note that the data keys are case-sensitive and must be valid JavaScript Object property strings.
This means the keys gold and Gold are treated as two unique values within the Data Manager.
The key to set the value for. Or an object of key value pairs. If an object the data argument is ignored.
Optionaldata: anyThe value to set for the given key. If an object is provided as the key this argument is ignored.
Adds a Data Manager component to this Game Object.
The depth of this Game Object within the Scene.
The depth is also known as the 'z-index' in some environments, and allows you to change the rendering order of Game Objects, without actually moving their position in the display list.
The default depth is zero. A Game Object with a higher depth value will always render in front of one with a lower value.
Setting the depth will queue a depth sort event within the Scene.
The depth of this Game Object. Ensure this value is only ever a number data-type.
Sets the display size of this Game Object.
Calling this will adjust the scale.
The width of this Game Object.
The height of this Game Object.
Does this Container exclusively manage its children?
The default is true which means a child added to this Container cannot
belong in another Container, which includes the Scene display list.
If you disable this then this Container will no longer exclusively manage its children. This allows you to create all kinds of interesting graphical effects, such as replicating Game Objects without reparenting them all over the Scene. However, doing so will prevent children from receiving any kind of input event or have their physics bodies work by default, as they're no longer a single entity on the display list, but are being replicated where-ever this Container is.
Optionalvalue: booleanThe exclusive state of this Container. Default true.
Set whether filters should be updated every frame.
Sets the filtersAutoFocus property.
Whether filters should be updated every frame.
Set whether the filters should focus on the context.
Sets the filtersFocusContext property.
Whether the filters should focus on the context.
Set whether the filters should always draw to a framebuffer.
Sets the filtersForceComposite property.
Whether the object should always draw to a framebuffer, even if there are no active filters.
Set the base size of the filter camera. This is the size of the texture that internal filters will be drawn to. External filters are drawn to the size of the context (usually the game canvas).
This is typically the size of the GameObject.
It is set automatically when the Game Object is rendered
and filtersAutoFocus is enabled.
Turn off auto focus to set it manually.
Technically, larger framebuffers may be used to provide padding. This is the size of the final framebuffer used for "internal" rendering.
Base width of the filter texture.
Base height of the filter texture.
Pass this Game Object to the Input Manager to enable it for Input.
Input works by using hit areas, these are nearly always geometric shapes, such as rectangles or circles, that act as the hit area for the Game Object. However, you can provide your own hit area shape and callback, should you wish to handle some more advanced input detection.
If no arguments are provided it will try and create a rectangle hit area based on the texture frame the Game Object is using. If this isn't a texture-bound object, such as a Graphics or BitmapText object, this will fail, and you'll need to provide a specific shape for it to use.
You can also provide an Input Configuration Object as the only argument to this method.
OptionalhitArea: anyEither an input configuration object, or a geometric shape that defines the hit area for the Game Object. If not given it will try to create a Rectangle based on the texture frame.
Optionalcallback: HitAreaCallbackThe callback that determines if the pointer is within the Hit Area shape or not. If you provide a shape you must also provide a callback.
OptionaldropZone: booleanShould this Game Object be treated as a drop zone target? Default false.
Sets the mask that this Game Object will use to render with.
The mask must have been previously created and must be a GeometryMask. This only works in the Canvas Renderer. In WebGL, use a Mask filter instead (see Phaser.GameObjects.Components.FilterList#addMask).
If a mask is already set on this Game Object it will be immediately replaced.
Masks are positioned in global space and are not relative to the Game Object to which they are applied. The reason for this is that multiple Game Objects can all share the same mask.
Masks have no impact on physics or input detection. They are purely a rendering component that allows you to limit what is visible during the render pass.
The mask this Game Object will use when rendering.
Sets the name property of this Game Object and returns this Game Object for further chaining.
The name property is not populated by Phaser and is presented for your own use.
The name to be given to this Game Object.
Sets the position of this Game Object.
Optionalx: numberThe x position of this Game Object. Default 0.
Optionaly: numberThe y position of this Game Object. If not set it will use the x value. Default x.
Optionalz: numberThe z position of this Game Object. Default 0.
Optionalw: numberThe w position of this Game Object. Default 0.
Sets the position of this Game Object to be a random position within the confines of the given area.
If no area is specified a random position between 0 x 0 and the game width x height is used instead.
The position does not factor in the size of this Game Object, meaning that only the origin is guaranteed to be within the area.
Optionalx: numberThe x position of the top-left of the random area. Default 0.
Optionaly: numberThe y position of the top-left of the random area. Default 0.
Optionalwidth: numberThe width of the random area.
Optionalheight: numberThe height of the random area.
Set whether the filters should be rendered.
Sets the renderFilters property.
Whether the filters should be rendered.
Sets the rotation of this Game Object.
Optionalradians: numberThe rotation of this Game Object, in radians. Default 0.
Sets the scale of this Game Object.
The horizontal scale of this Game Object. Default 1.
Optionaly: numberThe vertical scale of this Game Object. If not set it will use the x value. Default x.
Sets the scroll factor of this Container and optionally all of its children.
The scroll factor controls the influence of the movement of a Camera upon this Game Object.
When a camera scrolls it will change the location at which this Game Object is rendered on-screen. It does not change the Game Objects actual position values.
A value of 1 means it will move exactly in sync with a camera. A value of 0 means it will not move at all, even if the camera moves. Other values control the degree to which the camera movement is mapped to this Game Object.
Please be aware that scroll factor values other than 1 are not taken in to consideration when calculating physics collisions. Bodies always collide based on their world position, but changing the scroll factor is a visual adjustment to where the textures are rendered, which can offset them from physics bodies if not accounted for in your code.
The horizontal scroll factor of this Game Object.
Optionaly: numberThe vertical scroll factor of this Game Object. If not set it will use the x value. Default x.
OptionalupdateChildren: booleanApply this scrollFactor to all Container children as well? Default false.
Sets the internal size of this Game Object, as used for frame or physics body creation.
This will not change the size that the Game Object is rendered in-game.
For that you need to either set the scale of the Game Object (setScale) or call the
setDisplaySize method, which is the same thing as changing the scale but allows you
to do so by giving pixel values.
If you have enabled this Game Object for input, changing the size will not change the
size of the hit area. To do this you should adjust the input.hitArea object directly.
The width of this Game Object.
The height of this Game Object.
Sets the current state of this Game Object.
Phaser itself will never modify the State of a Game Object, although plugins may do so.
For example, a Game Object could change from a state of 'moving', to 'attacking', to 'dead'. The state value should typically be an integer (ideally mapped to a constant in your game code), but could also be a string. It is recommended to keep it light and simple. If you need to store complex data about your Game Object, look at using the Data Component instead.
The state of the Game Object.
Sets this Game Object to the back of the display list, or the back of its parent container.
Being at the back means it will render below everything else.
This method does not change this Game Objects depth value, it simply alters its list position.
Sets this Game Object to be at the top of the display list, or the top of its parent container.
Being at the top means it will render on-top of everything else.
This method does not change this Game Objects depth value, it simply alters its list position.
Sets the vertex round mode of this Game Object. This is used by the WebGL Renderer to determine how to round the vertex positions.
The vertex round mode to set. Can be 'off', 'safe', 'safeAuto', 'full' or 'fullAuto'.
Sets the visibility of this Game Object.
An invisible Game Object will skip rendering, but will still process update logic.
The visible state of the Game Object.
Sets the w position of this Game Object.
Optionalvalue: numberThe w position of this Game Object. Default 0.
Sets the x position of this Game Object.
Optionalvalue: numberThe x position of this Game Object. Default 0.
Sets the y position of this Game Object.
Optionalvalue: numberThe y position of this Game Object. Default 0.
Sets the z position of this Game Object.
Note: The z position does not control the rendering order of 2D Game Objects. Use Phaser.GameObjects.Components.Depth#setDepth instead.
Optionalvalue: numberThe z position of this Game Object. Default 0.
Shuffles the all Game Objects in this Container using the Fisher-Yates implementation.
Removes all listeners.
Sort the contents of this Container so the items are in order based on the given property.
For example: sort('alpha') would sort the elements based on the value of their alpha property.
The property to lexically sort by.
Optionalhandler: FunctionProvide your own custom handler function. Will receive 2 children which it should compare and return a boolean.
Swaps the position of two Game Objects in this Container. Both Game Objects must belong to this Container.
The first Game Object to swap.
The second Game Object to swap.
Toggle a boolean value for the given key within this Game Objects Data Manager. If the key doesn't already exist in the Data Manager then it is toggled from false.
If the Game Object has not been enabled for data (via setDataEnabled) then it will be enabled
before setting the value.
If the key doesn't already exist in the Data Manager then it is created.
When the value is first set, a setdata event is emitted from this Game Object.
The key to toggle the value for.
Returns a JSON representation of the Game Object.
To be overridden by custom GameObjects. Allows base objects to be used in a Pool.
args
Whether this Game Object will render filters.
This is true if it has active filters,
and if the renderFilters property is also true.
Checks if this Game Object should round its vertices,
based on the given Camera and the vertexRoundMode of this Game Object.
This is used by the WebGL Renderer to determine how to round the vertex positions.
You can override this method in your own custom Game Object classes to provide custom logic for vertex rounding.
Provides methods used for setting the alpha property of a Game Object. Should be applied as a mixin and not used directly.